Next Gen Hybrid Acrylic Tech
EnduraTread is a highly durable hybrid acrylic coating designed for application to driving, parking, and walking surfaces. It withstands foot and vehicular traffic use and abuse. It cures to a hard, chemical-resistant finish that resists hot tire pick-up, common household cleaners, and automotive fluids. This smooth low sheen finish provides excellent adhesion and resists cracking, peeling, and chipping. Great for both interior and exterior use.
Product Features
- Hybrid Acrylic Formula
- Smooth Satin Finish
- Excellent Coverage
- Excellent Durability
- Resists Chipping & Cracking
- Mildew Resistant
- Easy To Apply
Product Uses
Suitable for, but not limited to the following properly prepared surfaces;
Interior/Exterior
- Walkways
- Patios & Decks
- Pool Decks
- Driveways
- Garage Floors
- Stairways
- Catwalks
- Loading Docks
- Stadium Ramps
- Entry Ways
- Asphalt
- Concrete Block
Great For Interior & Exterior Use!
3.7 Courtyard Gray
3.20 Sussex Gray
3.18 Clay
3.4 Black
Bean

Domino

FP Tan

Silver Knight

Twilight

Performance Qualities
- Product Quality: Premium Best
- Product Use: Interior & Exterior
- Application: Brush, Roller, & Spray
- Product System: Water-Based
- Sheen: Satin
- MPI Standards: N/A
- VOC Compliance: AIM, LADCO, OTC I & II, Canada, and CARB
Technical Data
Colors:
White, Tint Bases & 4 Stock Colors
3.0 White
3.1 Tint Base
3.2 Deep Base
3.3 Accent Base
Tinting:
Universal Colorants
Vehicle Type:
Proprietary Acrylic
Viscosity:
80 KU ± 2
Gloss @ 60°:
Satin | 20 units ± 2
Flash Point:
N/A
Coating Voc:
Not to Exceed 100 g/l – 0.84 lbs./gal
(Meets AIM, OTC I & II, and CARB Standards)
Solids by Volume:
38.6% ± 2%
Solids by Weight:
53.9% ± 2%
Estimated Coverage:
300 – 400 SFPG
(Coverage will vary significantly depending on application method, surface porosity and condition of the surface.)
Recommended Mil Film:
(Estimated @ 350 SFPG)
Wet: 4.6 mils
Dry: 1.8 mils
Estimated Dry Time:
(@ 70º F & 50% Relative Humidity)
To Touch: 1 - 2 hrs. | Recoat: 4 - 6 hrs
Lt. Foot Traffic: 6 - 8 hrs. | Vehicles: 3 – 5 days
Actual dry time may vary according to relative humidity, temperature, color, applied film build and air movement.)
Dries By:
Coalescence / Solvent Evaporation
Clean Up:
Warm Soap & Water
Thinning:
Clean Water
Weight/Gal:
11.1 lbs.
Shelf Life:
2 - 3 years unopened.
Packaging:
Gal. – 4/cs. | 5 Gal. - Each
Limited Warranty
Richard’s Paint warrants our products to meet the application, appearance and performance properties stated on the label. This Limited Warranty shall not apply to any defect or damage resulting from improper surface preparation, structural defects, failure of a previous paint or improper application of the coating, as described in the directions on the label of this container. If this product is found not to perform as specified, Richard’s Paint will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you.
ALL OTHER WARRANTIES ARE EXCLUDED BY RICHARD’S PAINT, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Limitations
Seller’s liability for any reason is expressly limited to reimbursement of the purchase price of the materials sold after proof of purchase is provided to the seller.
THIS WARRANTY EXCLUDES (1) LABOR AND COSTS ASSOCIATED WITH LABOR FOR THE APPLICATION OR REMOVAL OF ANY PRODUCT, AND (2) ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OR RESULTING FOR ANY REASON UNDER THE SALE, HANDLING, OR USE OF GOODS SOLD. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. This Limited Warranty may not be transferred or assigned.